Technology

Every five years, the Australian Bureau of Statistics (ABS) takes a snapshot of Australia through the Census. The last one was held in 2021, which means households across the country are being contacted again in 2026.

The information collected helps show how Australia's population and households are changing and is used to plan services and infrastructure, from schools and hospitals to transport and housing.

This guide answers the key questions about the 2026 Census, including when to complete it, who needs to be counted, what happens if you're late, fines, privacy and what to do if you're away from home.

The ABS also has a handy guide to doing the Census. It's a useful overview, but we've gone a little further below by answering some of the practical questions it doesn't cover.

If you're unsure how the Census rules apply to your situation, call the Census Contact Centre on 1800 181 227 for advice.

When is the 2026 Census in Australia?

Census night for the 2026 Census is Tuesday August 11 2026. Think of it as the snapshot date: questions about where you're staying and who's in your household should reflect Tuesday night.

You can complete the form earlier if you've received your instructions and already know where you'll be on August 11. If your plans are still up in the air, it's better to wait until you know where you'll be staying.

Can you complete the Census after Census night?

Census night isn't a hard submission deadline. If you haven't completed the form on Tuesday August 11, you can still submit it on Wednesday, Thursday, Friday or later.

The ABS continues collecting forms and following up with households after Census night, so if you're late, complete it as soon as you can.

(Image credit: Australian Bureau of Statistics (ABS))Is the 2026 Census compulsory in Australia?

Yes. Completing and submitting the 2026 Census is compulsory under the Census and Statistics Act 1905. But being late doesn't automatically mean you'll be fined.

The ABS first follows up with people who haven't completed their form. If someone still doesn't respond, they may be sent a written direction formally requiring them to provide the information. Ignoring that direction can lead to prosecution and a fine.

How much is the fine for not completing the Census?

If you've received a written direction and still don't comply, you can face a fine of up to AU$364 for each day you don't comply.

You can find more detail on the ABS's penalty provisions page.

Who needs to complete the 2026 Census?

The Census is designed to count everyone who's in Australia on Census night. That includes babies and children, international students, visitors and visa holders.

That doesn't mean everyone fills out their own form. In most homes, one person completes the household form for everyone staying there that night.

What if you don't have a fixed address?

You should still be included in the Census. If you're experiencing homelessness, the ABS provides Census field staff and other support to help you take part. If you're staying with someone on Census night, you can be included on their household form.

If you're travelling around Australia without a fixed or return address, such as camping, or in a caravan or boat, you still need to be included in the Census.

You'll generally be counted where you're staying on Census night. A caravan, tent or boat can be counted as your dwelling for the night, including at a caravan park, camping ground or marina.

If you don't have a usual address, the 2026 Census form lets you record that. For the usual-address question, the ABS says to select Elsewhere in Australia, choose Enter address manually and enter None in the suburb/locality box.

How do you complete the 2026 Census?

For most households, the process starts with instructions to complete the Census online. These include a Census number and temporary password you can use to access the form.

The ABS says the average household takes about 30 minutes to complete it.

What if you haven't received or have lost your Census letter?

You can still complete the Census. If you haven't received your instructions or no longer have them, you can get a Census number online or request a paper form.

Can you use a paper Census form?

Yes. Paper forms are available to anyone who wants one. Some households will receive a paper form automatically, while others can request one if they'd rather not complete the Census online.

If you need help completing the Census, the Census website has support options, including language and accessibility support. You can also contact the Census Contact Centre on 1800 181 227.

What if there are more than six people in your household?

A paper Census form can include up to six people. If more than six people are staying at your address on Census night, you can complete the Census online or request an extra paper form.

Can you complete your Census answers privately?

Yes. If you don't want other people in your household to see your answers, you can request a separate Census form and complete your information privately. The ABS explains how this works in its 2026 Census collection notice.

Can you change your Census answers after submitting the form?

Once a Census form has been submitted, the ABS says it can't be reopened or edited.

We couldn't find specific online guidance for what happens if you complete the Census early and your plans later change, so we called the ABS media line to clarify. The advice was to contact the Census Contact Centre on 1800 181 227. They'll talk you through the options if your plans have changed or you've realised you made a significant mistake.

Separately, the ABS has processes for dealing with multiple responses. If more than one Census form is submitted for the same person, it keeps the one containing the most complete information about that person.

(Image credit: Australian Bureau of Statistics (ABS))What if you're away from home on Census night?

If you're away from your usual home on Census night, you'll generally be counted where you actually spend the night. Your usual address can record you as temporarily away.

That can include staying with friends or family or spending the night in a hotel, hospital or aged care home. The ABS also has arrangements for people travelling overnight by plane, train or bus.

If you're temporarily overseas on Census night, you won't be counted in the Census for that night.

What if you're working on Census night?

If you're working overnight but will return to your usual home on Wednesday August 12 and won't be included on a Census form elsewhere, the ABS says you can be included on the form for your usual home.

How are FIFO workers counted in the Census?

Fly-in, fly-out (FIFO) workers who are staying at a worksite or camp on Census night should generally be counted there. For example, if you normally live in Perth but you're at a mining camp in the Pilbara, you'd be counted at the camp and listed as temporarily away from your usual address in Perth.

Why might a Census field officer visit your home?

Census field officers may visit homes to deliver letters or forms, help people complete the Census or follow up after Census night where a completed form hasn't been received.

So a knock at the door doesn't automatically mean there's a problem. In some areas, field visits are simply part of how the Census is carried out.

How can you check if a Census worker is genuine?

If someone claiming to work for the Census contacts you and you're unsure whether they're genuine, verify them through official ABS channels rather than relying on the contact details they give you. Use the official Census website or call the Census Contact Centre on 1800 181 227.

How can you tell if a Census text, email or website is genuine?

The same caution applies to texts, emails and websites. The ABS says genuine Census text messages use the sender ID CENSUS, while texts about other ABS surveys use ABSGov. The official Census website uses a .gov.au address.

If a message doesn't look right, don't use the link it contains. Go directly to the official Census website. The ABS also has online safety guidance.

(Image credit: Australian Bureau of Statistics (ABS))What questions are on the 2026 Census?

The 2026 Census contains 66 questions covering areas such as your household, age, cultural background, education, work and income, housing, religion and people who are away on Census night.

You can see the full breakdown in the ABS's 2026 Census topics and data release plan.

What's changed in the 2026 Census?

One of the biggest changes in 2026 is the addition of questions about gender and sexual orientation. Everyone is asked about their sex as recorded at birth, while people aged 16 and over are also asked about their gender and how they describe their sexual orientation.

The ABS says the change is intended to build a clearer picture of Australia's LGBTQ+ population and help inform health and community services. If you'd prefer not to answer, both the gender and sexual orientation questions include a prefer not to answer option.

People can also report up to four ancestries in the 2026 Census.

Do you have to answer every Census question?

No. The question about religion is explicitly marked as optional on the 2026 Census form.

The gender and sexual orientation questions for people aged 16 and over also include a "prefer not to answer" option. So, while taking part in the Census itself is compulsory, that doesn't mean every question requires you to provide a particular answer.

Is your 2026 Census information private?

Yes. Census information is protected by law, and the ABS says it doesn't share identifiable information from your Census form with other government departments or direct marketing companies.

That means your individual Census answers aren't handed to the Australian Taxation Office (ATO) to check your tax return or to Centrelink to check your eligibility for a payment.

You can read more in the ABS's 2026 Census Privacy Statement.

Is the Census anonymous?

No. The Census isn't anonymous because it asks for names and addresses. However, the ABS separates names and addresses from other Census information after processing.

When will the 2026 Census results be released?

The first 2026 Census results are due to be released in June 2027, with further data releases continuing into 2028.

Census data will be free to access through ABS tools including QuickStats, TableBuilder and ABS Data Maps.

(Image credit: Australian Bureau of Statistics (ABS))

• Vodafone uncovers a “nation full of drive” with 85% of Brits building towards a major ambition
• Over half of those surveyed believe it is easier to find opportunities in the digital era
• Vodafone launched the UK’s first Opportunity Hub in London, intended to provide advice and connections to ambitious visitors

Vodafone has released the results of research into how being connected has opened the door to people being able to pursue their goals.

With 40% of Brits feeling “more ambitious than ever” and a majority aiming to achieve major targets in personal and professional development, the research is part of VodafoneThree’s investment into building the UK’s best network.

Interestingly, the findings also highlight that key career events take place in our 20s and 30s, and accompany the successful Opportunity Hub event targeted at this age group.

Connecting unlocks opportunity

Vodafone’s survey found over half (55%) of Brits feel it is easier to find opportunities in the digital era, with 20% wishing they had started working toward their ambitions sooner. 42% believe greater connectivity has had a positive effect on reaching their goals, with 49% now “better placed” to achieve than they were 5 or 10 years ago.

The survey also uncovered the blocks to personal and professional ambitions. Unsurprisingly, financial constraints are the main barrier, with 22% admitting this. But lack of confidence at 13%, fear of failure (12%) and limited access to the tools needed for self-improvement (9%) are also mentioned as challenges.

However, life’s disruptions can be seen as launch points, with bereavement (27%) and redundancy (25%) catalysts for chasing ambitions, alongside parenthood (25%).

“Britain isn't short of ambition," a VodafoneThree spokesperson said, "the challenge is turning ambition into action. Our research shows that connectivity is increasingly part of that equation, with nearly two-thirds of would-be founders saying unreliable connectivity has held them back from starting a business locally.”

KitchenAid KF2 two-minute review

The KitchenAid KF2 Fully Automatic Espresso Machine is the entry-level model in the company’s six-strong range of automatic coffee machines, and was launched in mid-2026 alongside the KF3 and KF4.

It adopts the exact same slim build as its two siblings, making any of them ideal for smaller kitchens. It also benefits from the exact same Intelligrind coffee bean grinder, which automatically determines the best grind size depending on the beans you’ve put in. The brewing unit is the same also, and in my taste tests, I couldn’t notice any obvious difference between the three. That means you’re going to get a wonderful, tasty espresso with each use.

What sets the KF2 apart — and where KitchenAid has made cuts to bring the cost down — is its feature set regarding drink presets and general usability. It’s also the only model in KitchenAid’s entire fully automatic coffee machine range to rock a steam wand for foaming milk — the others all use a hose-based system. While this may seem like a drop down in specification, I personally found the steam wand to perform the best when making foamy lattes and cappuccinos. What’s more, a steam wand is inherently going to perform better with non-dairy milk as it allows for greater control over temperature.

As with the KF3 and KF4, the KitchenAid KF2 is capable of making iced-coffee drinks, although as I found in my KitchenAid KF3 review, the results are a little underwhelming. This is because the brewed espresso is hot enough to quickly melt the ice in your cup or glass, despite KitchenAid claiming it’s brewed at a lower temperature.

Where the KitchenAid KF2 loses points slightly is the fact it doesn’t offer user profiles. I’ve been used to having profiles for some time at home, as I currently use the KitchenAid KF4 and have previously used the Philips LatteGo 4400, which offer four profiles and two profiles, respectively. Having them makes brewing a coffee incredibly quick and simple: just select a profile, select a drink and that’s it.

The fact the KF2 doesn’t have profiles means that brewing a variety of coffees will take longer, as you’ll have to select the drink and adjust any settings each time. It therefore might not be the best option for larger households, but for households of one or two people it’s still worthy of consideration.

The other slight niggle I have, which affects the KF3 and KF4 also, is that the unit can go through water relatively quickly due to it running a rinse cycle on start up and shutdown. The shutdown cycle I can understand, but I find the start-up cycle to be a little redundant.

All things considered, the KitchenAid KF2 Fully Automatic Espresso Machine is another fantastic option from the brand. It brews a well-extracted espresso each and every time and the steam wand works wonders for milk-based drinks.

KitchenAid KF2 review: Price & availability

• Launched in UK and US April 2026, Australia in July 2026
• List price $799.99 / £699 / AU$1,099

The KitchenAid KF2 Fully Automatic Espresso Machine launched in the US and UK in April 2026, before making its way to Australia in July 2026. It has a list price of $799.99 / £699 / AU$1,099, making it the company’s most affordable fully automatic machine.

The step-up KF3 adds a small color display to improve navigation and usability, four customizable profiles and a larger menu of drink presets, with a list price $999.99 / £749 / AU$1,349.

The top-tier model, the KF4 ($1,299.99 / £899 / AU$1,599) offers much of the same functionality as the KF2 with regard to grinder and brewing unit. It gains even more recipes, a large color touchscreen and KitchenAid’s hose-based milk-foaming system, complete with milk carafe.

I’m of the opinion that the KF2’s steam wand is the best option for expertly-frothed milk and for using with non-dairy milk varieties, instantly giving the machine a leg up over its siblings. And, since the actual coffee-brewing process is the same across all three machines, the KF2 represents excellent value.

That being said, the Ninja Luxe Cafe Premier offers more in the way of features, including a dedicated cold brew setting and cold-extraction for improved iced-coffee results, along with intelligent grind and dosage settings. Its list price is less than the KF2’s at $599.99 / £549.99 / AU$799.99, although it too doesn’t offer user profiles either and requires more hands-on input.

• Value score: 4 / 5

KitchenAid KF2 review: Specifications

Name

KitchenAid KF2 Fully Automatic Espresso Machine

Type

Bean-to-cup

Dimensions (H x W x D)

14.2 x 7.7 x 18.5 inches / 361 x 196 x 470mm

Weight

19.8lbs / 9kg

Water reservoir capacity

1.9 quarts / 1.8 liters

Milk frother

Yes, Pannarello steam wand

Bars of pressure

15

Noise level

72dB grinding, 60dB brewing

User profiles

0

KitchenAid KF2 review: Design

• Compact size will suit smaller space
• Steam wand suits plant-based milks
• No dishwasher-safe components

(Image credit: Future)

Of the three new compact automatic models, the KitchenAid KF2 sticks out the most for a couple of reasons. Firstly, it’s only available in a matte black finish (the KF3 and KF4 also come in Porcelain White, which I’m personally a fan of), and secondly there’s no color display.

The matte black finish is still sleek and smart-looking, it must be said, although there is a shiny, fingerprint-loving panel on the front at the top. You’ll want to keep a cloth nearby to keep it looking its best.

I don’t consider the lack of a color display to be a huge negative against the KF2, as the backlit panel is bright and clear when selecting a drink and adjusting settings. The color screens on the rest of KitchenAid’s espresso machine range do offer useful assistance with features like images of the drink you want to make, but it’s not something I missed when testing the KF2.

Physically the KitchenAid KF2 is the same as the other two compact models released in 2026, measuring 14.2 x 7.7 x 18.5 inches / 361 x 196 x 470mm (H x W x D). This compact form makes it easy to place the unit on a kitchen counter, and should be especially ideal for those with smaller kitchens. A couple of built-in wheels on the bottom at rear of the machine aid with manoeuvring into position.

Interacting with the KF2 is done via five buttons on the front panel. These select the drink type, dosage and strength — each of which can be pressed multiple times to cycle through options — one to activate cleaning cycles and a final button to initiate and cancel brewing. Each button press reveals a different backlit symbol on the front panel which are relatively self-explanatory.

Drink type cycles between espresso, coffee and over ice, dose lets you choose between one or two servings (either two cups under the dispenser or one for a double serving), and strength is a scale of one to three. This refers to how much coffee is ground into the brewing unit, from 7g (setting one) to 14g (setting three).

The bean hopper recessed into the top of the KF2 is large enough to hold 250g worth of coffee beans, which is accessed via a removable lid. While this does mean there’s no visual indication as to how many beans are left, it does at least mean the beans are kept airtight and away from light, helping to retain their freshness. There’s also a small chute for pre-ground coffee, and a scoop is included in the box.

The 1.8L water tank slides in and out the rear of the machine and has an integrated handle to make the process simple, although I personally prefer a side-mounted tank like the one found on the Philips LatteGo 4400 as I find it makes refilling that little bit easier. However, the KF2’s tank does at least feature a hinged lid, allowing you to fill it up from a jug if you wish.

FutureFuture

KitchenAid supplies a water filter with the KF2 that it claims lasts up to two months when used with standard tap water. If you use filtered water, its life can extend to up to six months. The filter can seem to be a little fiddly to install due to the water tank being so tall. Thankfully the included coffee scoop doubles up as a tool that clips onto the filter, giving you the extra length needed to screw it into place.

The drip tray is deep and extends virtually the full depth of the KF2, and has a large spout integrated into its rear for easy emptying. However, as I found with the KF3 and KF4, when you pour water out it can occasionally spill onto the front panel section as it can’t be removed. It’s not a huge dealbreaker, just prepare for a little extra clean up. Used coffee grounds are deposited into a removable bin in the center that can be tipped out when full. An icon will light up on the front panel to let you know when it’s time.

One of the standout features of the KitchenAid KF2, in my opinion, is its Pannarello steam wand used for milk foaming. I was surprised to find one used, not only because KitchenAid uses a proprietary hose-based system in the KF3 and KF4, but also because other brands such as De’Longhi and Philips have also turned their backs on steam wands (in general) in the pursuit of an entirely automatic coffee-making process.

Personally, I appreciate KitchenAid's choice to include a steam wand here, as it enables you to create genuine milk foam, even when using non-dairy alternatives. In my experience, the hose system on the KitchenAid KF3 and KF4, the LatteGo system on the Philips 4400, and the LatteCrema system on the De'Longhi Magnifica Evo Next all fell short of producing a satisfactory level of milk foam for my taste.

The use of the steam wand does mean there’s some hands-on input required, as you need to hold the jug (which isn’t included in the box) under the steam outlet until the foam reaches your desired level. There’s also no built-in thermometer, so unless you use a third-party thermometer, you’ll have to judge when the milk is ready based on touch.

Whether you are crafting a flat white or a cappuccino, the wand features a small slider for 'more foam' or 'less foam' to ensure you get the perfect texture. By opening and closing the integrated air intake, this slider regulates the airflow: increasing the intake pumps more air into the milk, which creates a more voluminous and aerated foam. Keeping it closed is ideal for texturizing milk for lattes that don’t require as high a level of foam.

The KF2 features thorough cleaning cycles, including the ability to completely evaporate the internal system of water. There are also programs for descaling and cleaning the brewing unit, which require you to press a variation of buttons to initiate. A complete set of useful instructions is included in the box. Do note that none of the removable parts are dishwasher safe.

• Design score: 4.5 / 5

KitchenAid KF2 review: Performance

• Consistently well-extracted espresso
• Steam wand delivers silky, well-foamed milk
• Lower brewing temperature for iced drinks still too hot

(Image credit: Future)

Having already reviewed the KF3, and knowing it uses the exact same brewing unit, I was expecting the same excellent results from the KitchenAid KF2. Fortunately my expectations were realised, as the compact KF2 produced a great-tasting espresso with each use.

Much of its success can be attributed to the IntelliGrind system that automatically determines the ideal grind size depending on your chosen beans. You can’t see the grinder at work, nor does the unit tell you what grind setting it’s chosen, you just have to put your trust in it to deliver optimal results. Your trust is rewarded.

However, if you're not completely satisfied with the crema or taste of your espresso, then the KF2 does offer the ability to manually adjust the grind to a finer or coarser level by way of a lever behind a compartment on the right-hand side of the machine. A finer setting is recommended for light-roast beans, while dark-roast beans benefit from a coarser setting. Since I was using medium-roast beans, I left the slider at the default setting in the middle.

Before you consider adjusting the grind level, you’ll first want to experiment with the strength of either the espresso or coffee drink presets. As mentioned earlier, there are only three coffee-based drink recipe presets: espresso, coffee and over ice. If you move up to the KF3 or KF4 you’ll gain recipes including latte macchiato, flat white and caffe latte, to name a few.

You can also adjust the volume of water used for each drink type, and the temperature it’s brewed at, by pressing and holding a specific set of buttons. You’ll find the full details in the supplied user manual. I was perfectly satisfied with the default settings, but it’s good to know KitchenAid offers the ability to personalize each drink.

Do note that if you do adjust any default settings, they will become the new norm until you change them again. Since there are no user profiles, you may want to consult with other people in your household before you make any tweaks.

FutureFutureFuture

If you want milk with your coffee, then the Pannarello steam wand is capable of producing thick, velvety foam that’s perfect for lattes, macchiatos and cappuccinos. It’s semi-automatic in use, as all you need to do is hold a milk pitcher under the wand and press the start button on the main unit (once you’ve cycled the ‘drink type’ menu through to ‘steam’). A word of warning, make sure you already have the steam wand submerged in milk. I pressed start with the pitcher still on the drip tray and ended up with milk all over the counter and myself.

A small slider on the side of the steam wand housing can be used to adjust the level of foam you achieve, either ‘less’ or ‘more’. In my tests this worked a charm, with the ‘more’ setting aerating the milk to such a high level that it nearly overflowed from the pitcher.

I much prefer the use of a steam wand compared to the hose systems used on the KF3 and KF4, as it’s capable of producing a much better level of froth. It’s also a hell of a lot easier to keep clean, as it doesn’t require constant rinse cycles to ensure the hose is free of residue. I actually wish the steam wand was featured on the company’s other machines.

Do note however that there’s no built-in thermometer to automatically detect when milk reaches your desired temperature. You’ll either have to invest in a dedicated one, or go off touch to determine when to shut the steam off. Also note that a milk pitcher isn’t included in the box. You can buy one directly from KitchenAid for $19.99 / AU$29. I wasn’t able to find a listing on the company’s UK store, but in all honesty, the pitcher available is relatively basic, so you could always get one from Amazon for the same or less money.

Where the KitchenAid KF2 falls down slightly — in a similar fashion to the KF3 and KF4 — is with its iced drinks function. KitchenAid has designed the KF2 to brew an espresso shot at a lower temperature compared to a regular shot when you select the ‘over ice’ drink type.

For starters, iced coffee fanatics will likely prefer a genuinely cold shot of coffee as opposed to having to pour a cooler shot of espresso over ice. Admittedly KItchenAid isn’t the only company to employ this function, as the Philips LatteGo machines also ask you to put some ice into a cup or glass before brewing an espresso.

However, I can’t agree with KitchenAid’s claim that the iced coffee espresso shot brews at a lower temperature, as I used a thermometer to check the temperature of a regular shot and iced shot, and both returned a measurements between 45ºC/113ºF and 50ºC/122ºF, which was hot enough to quickly melt the ice I had in my glass. It’s not necessarily a huge dealbreaker, but the fact remains there are other machines such as the De’Longhi Dedica Duo and the Jura J10 that are able to pour proper cold-extracted espresso for longer-lasting iced drinks.

It is, however, pleasing to find the KF2, like other KitchenAid espresso machines, is QuietMark-certified, signifying it should be whisper-quiet when grinding and brewing. And in reality, that’s certainly the case. I was able to record an average of 70dB while the machine was grinding and an average of 60dB when brewing. That, perhaps expectantly, puts it on par with the KF3 and KF4. That being said, we found the flagship KF8 to be quieter still with an average of 44dB during the entire coffee-making process.

(Image credit: Future)

• Performance score: 4.5 / 5

Should you buy the KitchenAid KF2?KitchenAid KF2 score card

Attribute

Notes

Score

Value

KitchenAid's most affordable fully auto machine offers the best combination of features in my opinion.

4.5/5

Design

Compact form will suit smaller kitchens, although lack of user profiles can add time to brewing process.

4/5

Performance

Excellent coffee and milk frothing, but iced options are a little disappointing.

4.5/5

Buy it if...

You’re short on space

The KF2 is one of the more compact coffee machines we’ve tested, and will slot nearly into smaller kitchen spaces.

You want the essentials done well

The KF2 might not offer an extensive menu of preset drink recipes, but it nails the basics of espresso and coffee.

You drink lattes and cappuccinos

The Pannarello steam wand works wonders to produce thick, velvety foam that’s perfect for milk-based coffee drinks — and it’s great for non-dairy varieties too.

Don't buy it if...

You want a more hands-off approach

With no user profiles and manual input needed for milk, the KF2 isn’t as ‘set and forget’ as many other fully automatic coffee machines.

You don’t like the color black

The KitchenAid KF2 is only available in a matte black finish, which could clash with your kitchen decor.

You like to drink cold brew

The KitchenAid KF2 can’t make it, and its iced coffee espresso shot is still hot enough to quickly melt ice cubes.

KitchenAid KF2 review: Also consider

KitchenAid KF3

This step-up model offers a wider range of drink presets and can automatically foam milk for you via a hose-based system. It also offers four user profiles to save personalized drinks.

Read my full KitchenAid KF3 review

Lavazza A Modo Mio Jolie Evo

If you have a small kitchen and just want a fuss-free coffee, this Lavazza pod coffee machine could be just the thing for you. Espresso is superb and it’s incredibly simple to use.

Read our full Lavazza A Modo Mio Jolie Evo review

Ninja Luxe Café

This 3-in-1 bean-to-cup espresso machine can handle virtually any coffee-based drink you could wish for, including filter and cold brew. It takes care of most of the leg work for you, and is regularly discounted.

Read our full Ninja Luxe Cafe review

How I tested the KitchenAid KF2

(Image credit: Future)

I used the KitchenAid KF2 over a one-week period. I was confident knowing how to use the machine, having previously reviewed the KF3 and from using the KF4 on a daily basis at home.

I prepared all of the available drink recipes — espresso, coffee and over ice — and used a thermometer to test the temperature of the ‘over ice’ espresso shot to determine if it was actually brewed at a lower temperature, as KitchenAid claims.

I also used the integrated steam wand in both its ‘less foam’ and ‘more foam’ settings to determine if there was indeed a difference in results. I also tested it with dairy milk and a barista-style oat milk to find out if it worked well with non-dairy milk varieties.

Read more about how we test

First reviewed August 2026

The Big Bang Theory's Bernadette as a demon is something I didn't think I'd ever see in Stuart Fails to Save the Universe — but, now that I have, it somehow makes complete sense.

Last week's episode saw us meet her in a wizarding world but, in this week's entry we're swapping the magical action for something a little more One Flew Over the Cuckoo's Nest-coded.

But who, if anyone, really is crazy? And when does Stuart Fails to Save the Universe episode 4 arrive on HBO Max?

What time can I watch Stuart Fails to Save the Universe episode 4 on HBO Max?

For US viewers, Stuart Fails to Save the Universe episode 4 will drop on Thursday, August 13 at 6pm PT/ 9pm ET.

Internationally, you're looking out for these timings:

• US – Thursday, August 13 at 6pm PT / 9pm ET
• Canada – Thursday, August 13 at 6pm PT / 9pm ET
• UK – Friday, August 14 at 2am BST
• India – Friday, August 14 at 6:30am IST
• Singapore – Friday, August 14 at 9am SGT
• Australia – Friday, August 14 at 11am AEDT
• New Zealand – Friday, August 14 at 12pm NZDT

When do new episodes of Stuart Fails to Save the Universe come out?

Me and who being suited and booted for more episodes? (Image credit: HBO Max)

New episodes of Stuart Fails to Save the Universe will make landfall every Thursday in the US and on Fridays everywhere else. Here are the all-important dates you need to know about:

• Episode 1: out now
• Episode 2: out now
• Episode 3: out now
• Episode 4: August 13
• Episode 5: August 20
• Episode 6: August 27
• Episode 7: September 3
• Episode 8: September 10
• Episode 9: September 17
• Episode 10: September 24

Apple is reportedly cutting 2026 hardware shipments as memory supplies tighten. See what it could mean for iPhone, Mac, and iPad buyers.

The post Apple Trims 2026 Hardware Plans: What This Means for the iPhone 18 appeared first on TechRepublic.

• Amazon revealed plans to build Gilroy, California data center were first submitted in 2020
• Gilroy citizens have accused the city council of inadequate communications concerning the development
• The 438,500-square-foot data center occupies a 56-acre chunk of farmland 30 miles south of San Jose

Citizens of Gilroy, California, have expressed dismay at the building of an Amazon data center, which they say they were not informed of - and when one resident attempted to lodge a complaint, she was told that comments on the plans were closed in 2024 – long before most citizens were even aware of the planned installation.

Occupying a 56-acre area of farmland between a Walmart and a local shopping center, the Amazon project appears to have been quietly pushed through using obfuscation and clever use of 45-year-old planning laws.

Amazon has apparently made provision to divert wastewater to the data center, and donated money for local spending. Meanwhile, the city mayor has responded to the concerns by likening the water-and power-hungry Amazon data center to a food distribution center that was also recently approved.

Opposition and sponsorships

Utilizing the old city zoning rule – originally intended for industrial development along a freeway – has enabled the data center to proceed into full development without planning scrutiny from residents. However, the apparent collaboration between Amazon and the Gilroy city council and mayor has not gone unnoticed, with opposition organized against the project.

One of those organizers, 21-year-old college student Landon Sepulveda, indicated to the Wall Street Journal that there was a trust issue between the population and the city administrators. “These processes were not enough for the citizens of Gilroy to do anything about it. We’ve elected them to tell us, and we shouldn’t have to watch over their shoulders.”

Another citizen, elementary school teacher Coleen Crew, told a recent council meeting “Many if not most residents first learned about this project after construction had already begun.”

Amazon and the Gilroy council have been at pains to highlight the advantages of the deal, citing jobs, tax revenue, and that solution to concerns over water use. Amazon has also donated $1 million for a new city fire truck, and donated money to non-profits and the city’s annal Gilroy Garlic Festival.

Mayor Bozzo and AWS

Responding to public dismay over the development, Mayor Greg Bozzo has highlighted an “opportunity to change the way that we do business in Gilroy. We’re adapting to the times.”

Meanwhile, Amazon Web Services’ VP of economic development Roger Wehner claims the project “followed standard approval processes.” He added: “We’ve since met directly with residents and hosted an open house to hear feedback and answer questions.”

The challenges and advantages of data centers seem to be the modern day equivalent of opposition to nuclear plants from 50 years ago. While the data center’s continued construction seems inevitable, and Amazon has made some generous provisions, it is disappointing that the city’s residents were not informed of the development – and that might be the biggest problem here.

Figure says its Figure 03 humanoid climbed a ladder autonomously, showcasing progress in whole-body robotic control while leaving reliability questions.

The post Figure 03 Humanoid Robot Climbs Ladder Autonomously in New Demo appeared first on TechRepublic.

Adding more fuel to the fire over which city is actually Australia’s best place to live, those residing in the all-seasons-in-a-day city of Melbourne have a new statistic on their side — and it all relates to fixed-line broadband speed.

Ookla, the company behind the hugely popular Speedtest tool that helps anyone diagnose their home internet speeds, has published its latest Global Index rankings, revealing median fixed-broadband download speeds by country and city.

As a country, Australia is slowly but surely moving up the table. There was a time we ranked as low as 86th, but we now sit at 50th, with a median fixed-broadband download speed of 162.34Mbps.

That improvement follows NBN Co’s September 2025 speed-tier shake-up, which introduced a 2Gbps wholesale option for eligible FTTP and HFC premises, alongside faster speeds on several existing higher-end tiers. Of course, not every Australian can access 2Gbps just yet — and, as we’ll see, the plan you choose is only one part of the equation.

For context, Singapore takes the crown with a median download speed of 447.75Mbps. One can only dream of a day when that becomes a reality Down Under.

Why the huge gap?

There are several reasons why Australia trails the pack so dramatically — although with 141 other countries clocking slower speeds, things could certainly be worse — and, in my mind, one of the most obvious is that many Australians are still connected to comparatively slow NBN plans.

The Australian Competition & Consumer Commission publishes a quarterly Wholesale Market Indicators Report that provides an overview of active NBN connections and their download data rates.

The most recent report, covering the March quarter of 2026 and published in July, revealed there were just over 2.665 million active 50Mbps NBN connections, out of a total of 8.839 million residential broadband services. That works out to around 30.2%.

A 50Mbps plan naturally puts a ceiling on the speed a customer can record in a Speedtest. If enough users on lower-speed tiers are represented in Ookla’s sample, that will bring the national median down.

One relatively straightforward way for Australia’s international standing to improve, then, is for more eligible households to take advantage of NBN Co’s free fibre upgrade. The program is open to millions of eligible FTTN and FTTC premises, allowing them to upgrade to FTTP if they take out an eligible high-speed service — such as one of the best NBN 500 plans.

A fixed-line civil war

Move the slider over to ‘City’ and the results become much more varied, with cities from North and South America, Asia and Europe all jostling for position. Valparaíso in Chile takes the crown with a huge 425.84Mbps, followed by Abu Dhabi with 399.92Mbps, for example.

Australian cities evidently have some work to do. Scroll down to position 64 and you hit Melbourne with a median download speed of 177.69Mbps — faster than Australia’s national median, it must be said — while Sydney trails behind in position 76 with a meagre 149.91Mbps.

A difference of 27.78Mbps might not sound like much, but Melbourne’s median result is around 18.5% faster than Sydney’s. When intercity tensions are already high, that’s a huge bragging right for the southerners.

Wait, we can (try to) explain

Nobody ever wants to be seen as the weaker of two, and while the reported figures are great news for people in Victoria, there is potentially a plethora of factors at play that pave the way for a Melbourne victory.

We’re not here to make excuses, of course, but there are plenty of unknowns.

Firstly, there could simply be a larger proportion of Melburnians connected via superior fibre-to-the-premises infrastructure. FTTP allows households to access the fastest NBN plans, including the newer multi-gigabit options where available.

While it’s not totally conclusive, there is some evidence to support this idea. That evidence is publicly available technology-mix figures, although they’re reported at a state level, rather than for Greater Melbourne and Greater Sydney specifically. Data compiled from NBN rollout information indicates Victoria has a higher share of premises using FTTP than NSW — roughly 66% versus 60% — while it also indicates there are more active connections on the inferior fibre to the node (FTTN) connection type in NSW too.

This doesn’t completely settle the argument. The figures not only include regional areas, but they also show the technology available to a property, as opposed to an active plan supplying an address.

All fixed-line connections are welcome

Furthermore, on the subject of NBN, Ookla’s Speedtest results don’t only capture NBN connections, but fixed-broadband tests from other fixed networks too, including private fibre operators. Both Melbourne and Sydney are home to several such networks, including Vocus, GigaComm and OptiComm, while Melbourne also has DGtek — a private FTTP network concentrated in the city’s CBD and inner south-east.

Exact figures for active connections on those networks are tricky to come by. But if Melbourne has a higher concentration of people connected to these kinds of high-speed private fibre services, they could be recording considerably quicker test results and helping push its city median upwards.

Not telling the complete story?

Another excuse potential explainer is the way Ookla collects its data. Whereas the ACCC’s Measuring Broadband Report — which published its final instalment in June 2026 — monitors a selected group of Australian homes across nine popular ISPs, Ookla receives data when people choose to run a Speedtest.

This doesn’t mean someone repeatedly checking their connection can single-handedly skew the data, as Ookla averages each unique user’s results into a single sample for the relevant time period and location. Still, the results are dependent on who chooses to test. Melbourne’s sample could contain a different mix of internet plans, connection technologies, devices and Wi-Fi setups than Sydney’s.

(Image credit: TP-Link)When did you last check your Wi-Fi router?

Home equipment can make a considerable difference too. A household with a Wi-Fi 5 router tucked away in a cupboard, a busy 2.4GHz network and a phone testing from the other end of the house could record a much slower result than the same connection tested over Ethernet.

On the flip side, a newer Wi-Fi 6E or Wi-Fi 7 router, a properly positioned mesh system and a compatible device can give a household a far better chance of getting close to the speeds it actually pays for. That doesn’t make the underlying internet plan any faster, of course — it simply means the home network is less likely to be the bottleneck.

If your own Speedtest result seems suspiciously low, it may be worth checking out our guide to the best mesh Wi-Fi systems to find out if your home could benefit from an upgrade.

And, trying to claw a point back for Sydney, it can be argued that people often run a speed test when their internet connection starts lagging. While Melbourne’s median tested speed is higher, that doesn’t necessarily mean every connection in the city is consistently faster or more reliable.

• Virginia now makes data centers pay for their own power lines
• Virginia hosts 570 data centers, more than any other US state
• Spanberger says the policy could save residents hundreds of millions

The US state of Virginia is requiring data centers to cover electricity infrastructure costs created specifically by their rapidly growing power demands.

The move comes as electricity prices across the state have risen sharply alongside the expansion of artificial intelligence facilities.

State officials say the new requirement could prevent ordinary electricity customers from carrying costs associated with large data center developments.

Data centers face higher infrastructure costs

Virginia has become the largest data center hub in the United States, with at least 570 facilities operating across the state.

Their growing electricity consumption has required major investments in transmission infrastructure, increasing pressure on the regional power system.

The State Corporation Commission, Virginia’s public utility regulator, has ordered data centers to pay for transmission infrastructure used exclusively by their facilities.

The requirement means utilities can no longer spread those dedicated infrastructure costs across their wider customer base.

Electricity prices in the region have already increased substantially, with PJM Interconnection raising prices by 76% during recent capacity market changes.

Monitoring Analytics, an independent market watchdog, has attributed much of that increase to growing demand from data centers.

The issue has become politically important as artificial intelligence companies continue expanding computing capacity across Virginia.

Some local authorities have even asked employees and institutions, including schools, to reduce electricity consumption during periods of high demand.

"We are taking real steps to address rising energy costs for Virginians," said the Governor of Virginia, Abigail Spanberger.

"I will continue to work with the General Assembly and take action to make sure data centers pay their fair share, adhere to strict environmental standards, and listen to the concerns of local communities.”

Washington’s promise reaches the states

The Virginia decision follows President Donald Trump’s effort to make major AI companies finance infrastructure required by their expanding operations.

Trump met leading AI companies at the White House in March and urged them to “pay their own way” for necessary infrastructure.

The administration expanded that approach in July by calling on governors, utilities, and data center developers to follow similar principles.

Critics have questioned whether voluntary commitments can significantly change electricity costs without enforceable state or federal requirements.

Virginia is currently among the few states taking concrete action against rising electricity costs linked to large electricity users.

Oregon has also introduced higher electricity rates for data centers consuming at least 20 MW, under provisions contained within its POWER Act.

Portland General Electric subsequently increased rates for those large consumers by 30%, while residential electricity costs fell by approximately 1.3%.

The Virginia approach differs by focusing specifically on infrastructure dedicated to individual data center projects.

The policy could become increasingly important as AI companies expand AI tools requiring increasingly powerful computing facilities and greater electricity supplies.

If other states adopt similar requirements, data centers could face more direct responsibility for infrastructure costs they generate.

For Virginia households, however, the immediate question is whether the policy actually prevents future electricity increases rather than simply changing who pays existing infrastructure bills.

Spanberger said the state expects the measure to save Virginians “hundreds of millions of dollars” while requiring data centers to pay their fair share.

Via Tom's Hardware

Reportedly, not enough defect-free units were produced.

Steam’s hardware distribution partner in Europe was attacked, exposing customers’ personal information.

Klaviyo says fewer than 200 people are known to be affected by a sign-up bug that may have exposed passwords to third-party trackers.

The post Klaviyo Sign-Up Bug May Have Exposed Passwords to Ad Trackers appeared first on TechRepublic.

Cyber incidents are reaching UK manufacturers through both their own systems and their suppliers, putting production continuity under pressure.

The post 30% of UK Manufacturers Report Cyber Incidents in Their Business or Supply Chain appeared first on TechRepublic.

AI power demand is surging, but the grid problem emerging in US data is more local and complicated than a nationwide electricity shortage.

The post Will AI Data Centers Overwhelm the Power Grid? What US Grid Data Shows appeared first on TechRepublic.

Research links prolonged smartphone use to neck discomfort and hand pain, while evidence for spinal damage and weaker grip remains less certain.

The post The Physical Cost of Spending Hours on Your Smartphone appeared first on TechRepublic.

X-Men '97 season 2 is almost over. Indeed, with just one episode remaining of the popular Marvel TV show's latest season, we'll soon be saying goodbye to the titular super-team until their animated series returns for its third instalment.

There's a great deal for this season's finale to wrap up, too. Will the comatose Remy win his battle of wills with Apocalypse? Does X-Force teaming up with X-Factor mean we should prepare ourselves for an almighty showdown between their combined forces and the X-Men? And how will this season's last chapter ultimately set the stage for X-Men '97 season 3?

I can't answer any of those questions yet — but, I can tell you when season 2 episode 9, titled 'Survival of the Fittest', will be released. So, read on to find out when it'll come out!

What is the launch time for X-Men '97 season 2 episode 9?

I'm not sure Rogue would be able to take losing Gambit for a second time... (Image credit: Marvel Animation/Disney+)

The finale of X-Men '97's second season will make its Disney+ debut on Wednesday, August 12 at 12am PT / 3am ET.

That's the time it'll air in the US and Canada, anyway — for fans in the nations listed below, here's when it'll premiere on one of the world's best streaming services in your neck of the woods:

• US — Wednesday, August 12 at 12am PT / 3am ET
• Canada — Wednesday, August 12 at 12am PT / 3am ET
• UK — Wednesday, August 12 at 8am BST
• India — Wednesday, August 12 at 12:30pm IST
• Singapore — Wednesday, August 12 at 3pm SGT
• Australia — Wednesday, August 12 at 5pm AEST
• New Zealand — Wednesday, August 12 at 7pm NZST

Does X-Men '97 season 3 have a release date yet?

We'll see Morph, Wolverine, Storm, and Forge again in X-Men '97 season 3 (Image credit: Marvel Animation/Disney+)

No. However, Marvel's Head of TV, Animation, Streaming, and Comics Brad Winderbaum recently confirmed that the Marvel Cinematic Universe (MCU) adjacent TV show's third season will drop sometime in 2027. That follows Winderbaum previously stating that new seasons of the highly-rated cartoon will start to arrive every year from here on out.

Even so, I believe it'll be a long time before an official launch date is announced. There'll be plenty of opportunities for Marvel to reveal one before the end of 2026, with D23 Expo (14-16 August) and New York Comic-Con (8-11 October) traditionally being prime candidates for the comic giant to tease new details about upcoming seasons.

That said, Marvel usually doesn't unveil release dates for its TV shows until much closer to their actual launches, so I'd be amazed if we find out when the Marvel Phase 6 show's third season will premiere in the near future.

• Microsoft has hiked the cost of a Windows 11 license for PC makers
• A new report claims that the annual price increase is 'significantly' more this year
• That's really not going to help the PC market, coming on top of all the pain with hardware price rises that we're already experiencing

PC prices are already facing various unfortunate pressures — thanks to the RAM crisis, and other increased component costs aside from memory –— but it appears that Microsoft is throwing fuel on the fire with hikes on the software side.

Wccftech spotted a report from Economic Daily News (EDN), a Taiwanese site, claiming that Microsoft has increased the price it charges PC makers for a Windows 11 license. Apparently the cost of installing Windows 11 on a pre-built desktop PC or a laptop has gone up by 7% to 10% as of last month.

Of course, bear in mind this is just a rumor (and the article is translated, so we need to be careful about any potentially lost meaning), but it's an alarming sounding prospect.

Microsoft puts up the price of a Windows 11 license every year, so this isn't new or unexpected, but normally Microsoft applies a single-digit increase, and this year the price hike has reportedly been a good deal more, possibly tipping into double-digits (10%). The (translated) article calls this a "significant increase" compared to past years, and the information comes from an executive at an (unnamed) PC maker.

Seemingly current product prices already reflect Microsoft's extra charge, with the bigger rises in fees having been given to PCs with faster processors, we're told.

EDN observes that the prices of PCs are expected to rise by 5% in the third quarter of 2026, at least for Acer and Asus systems in the Taiwanese market. Other regions and vendors may, of course, vary, but all OEMs (PC makers) must pay Microsoft for a Windows 11 license (if using the OS, of course).

Analysis: software salt

(Image credit: Microsoft)

As noted, these cost increases are supposedly already priced into hardware on the shelves, and EDN observes that neither consumers nor businesses have really batted an eyelid.

That's mainly because the hardware-based pricing misery — for more expensive RAM, SSDs, GPUs (increasingly of late) and other components — is driving the nastier price rises, and the Windows 11 increase is relatively small fry in comparison. So, this software hike has purportedly flown under the radar, effectively eclipsed by the hardware pain.

If this report is true, and Microsoft has indeed put prices up a good deal more than normal, that's a distinctly unhelpful move. On the hardware side of the equation, we know prices to manufacture goods are going up — and that cost increases will inevitably be passed on to the end buyer. That's just business, but there's no obvious reason why software costs should be hiked more than normal, other than what the cynical might suggest appears to be opportunism from Microsoft (and maybe the growing cost of the AI side of the company).

This is effectively rubbing software salt into hardware wounds, and the PC market could really do without it. Although speaking of salt, all of this depends on whether this rumor is on the money, and I think it's worth remaining somewhat skeptical in that regard, albeit that EDN has proved a reliable source in the past.

Alienware 15 (2026) review: Two Minute Review

Alienware's going "entry-level" with this one. Or, at least sort of. The whole list of configurations of the new Alienware 15 (2026) is a little confusing. Officially it starts at £879 in the UK, but for that you get an RTX 3050 GPU instead of the 5050 that we have in this review unit. That's a five year old graphics card there hidden away in a 2026 laptop. So first thing's first, keep a bloody good eye on the spec you get. The last thing you want is to think you're snatching up a bargain, only to be caught out by a sub-par silicon mix-up crushing your frame-rates in the process.

The good news, though, is that on the whole the specs of the Alienware 15 (2026) we were sent (Ryzen 7 260, RTX 5050, 16GB DDR5, and 512GB SSD), is actually remarkably good value for money. Particularly in the US. You can pick one up for about $1,160 or so. It's a lot more expensive in the UK (£1,333) but Stateside, it's a healthy config that delivers some impressive performance as it just peeks over that $1,000 parapet.

Ultra graphical presets aren't off the table here, at 1920x1200, but medium-high on those AAA titles is really going to be the place that leverages that 165 Hz 1920x1200 panel most efficiently. It's not the best of screens, though, as Alienware's got this thing labelled as "IPS", and I'm just not sure about that, because to be frank, the color reminds me more of a TN panel from 2011, than a modern-day IPS, "IPS-like" maybe. Perhaps we've been spoiled with OLED displays of late. Perhaps.

(Image credit: Future)

It's not the only place that's been stripped back either; connectivity still touts Wi-Fi 6 and Bluetooth 5.2 (yes, in 2026), the build quality is a little plasticky, and the bevelled edges and rounded corners everywhere feel a bit dated, even if it keeps in-line with the brand's style. Oh and then there's my personal pet peeve, the dreaded single-channel memory setup. So you (yes you) can spend more money and increase the capacity at a later date (I mean you could do that with a dual-channel setup as well, but what do I know?).

Fortunately, a lot of the usual laptop woes that crop up with single-channel memory are easily overlooked by that hefty RTX 5050 delivering the frame-rate goodness, but it's still worth bearing in mind, if you are fixated on using this thing for productivity over gaming.

Oh and the SSD is just sad. Sure it's a PCIe 4.0 drive, and the sequential speeds are good, but the random 4K writes are savagely low, and it's a 512GB model, leaving you with about 480GB to play with once Windows 11 is installed. Ouch.

Still, for the price, and those negatives aside, it's remarkably robust and a genuine bargain, particularly around deal time.

Alienware 15 (2026) review: Price & Availability

• Available for $1,159.99 / £1,333 (around AU$2,500)
• UK buyers pay a hefty premium compared to the US
• Base config still ships with RTX 3050 or 4050 era silicon

On the cost front, the Alienware 15 (2026), also known by its model number DA15265, is a curious thing. And its appeal is almost entirely dependent on where exactly your PC gaming escapades are based.

If you're in the US, it's a strikingly good deal. At $1,160 at time of writing, you get top-tier performance, delivering high frame-rates in modern titles, for a smidge over the $1K mark. If you're in the UK, though, this specific config will set you back £1,333.81. That's the equivalent of about $1,800. And yes, I know sales tax is a thing as well, but it's not $640 that's for sure. What a markup.

The more confusing element, however, is the broad range of SKUs available. It's not uncommon to see a single product and design offer many different configurations, especially graphics cards for gaming laptops, but the fact that the Alienware 15 (2026) is available with cards all the way down to an RTX 3050 does muddy the waters somewhat. Particularly if you're snapping up a quick deal around Black Friday, and don't take time to check the specs.

• Value score: 3.5 / 5

Alienware 15 (2026) review: specs

Base

Review

Price

$1,049.99 / £879 (around AU$1,679)

$1,159.99 / £1,333.81 (around AU$2,548)

CPU

AMD Ryzen 5 220

AMD Ryzen 7 260 (8 cores, 16 threads, up to 5.1GHz)

GPU

Nvidia GeForce RTX 3050 (UK) / RTX 4050 (US)

Nvidia GeForce RTX 5050 8GB

RAM

8GB DDR5 5,600 MT/s

16GB DDR5 5,600 MT/s

Storage

512GB M.2 PCIe 4.0 NVMe

512GB M.2 PCIe 4.0 NVMe

Display

15.3-inch WUXGA (1920 x 1200) 16:10, 165Hz

15.3-inch WUXGA (1920 x 1200) 16:10, 165Hz

Ports and Connectivity

2x USB-A 3.2 Gen 1, 1x USB-C 3.2 Gen 2 (PD 100W + DP 1.4a), 1x USB-C 3.2 Gen 1, HDMI 2.1, RJ45 (1GbE), combo audio; Wi-Fi 6, Bluetooth 5.2

2x USB-A 3.2 Gen 1, 1x USB-C 3.2 Gen 2 (PD 100W + DP 1.4a), 1x USB-C 3.2 Gen 1, HDMI 2.1, RJ45 (1GbE), combo audio; Wi-Fi 6, Bluetooth 5.2

Battery

70Whr - 130W Adapter

70Whr - 180W Adapter

Dimensions

13.76 x 9.85 x 0.9 in / 349.5 x 250.3 x 22.95 mm

13.76 x 9.85 x 0.9 in / 349.5 x 250.3 x 22.95 mm

Weight

4.85lbs (2.2kg)

4.96lbs (2.25kg)

Alienware 15 (2026) review: Design

• Slimmer than you'd expect from Alienware
• Dated design leaves a lot to be desired
• Spongey keyboard and abrasive trackpad

Surprisingly for a 15-incher, the Alienware 15 (2026) is... well, not quite as bulky as you'd expect for an Alienware unit at the budget end of the spectrum.

It's not light at 2.2kg (4.85lbs), at least not in this configuration, but it's a far cry from what you'd usually expect for an affordable gaming laptop. Sadly, Alienware's still hanging onto that smooth-faced design somewhat here, and there's a lot of curvature. The panels, the chassis, the hinge, the edges, they all slowly curve downwards, into an almost egg-shaped design. Even the screen has a bevelled curved edge smoothly radiating outwards, which does feel a touch dated compared to some of the competition out there.

Perhaps unsurprisingly for a laptop at this price, the materials aren't the best either; there's a lot of plastic here, and it's the single biggest indicator that, yeah, this might be on the cheaper end of the budget spectrum.

(Image credit: Future)

The keyboard too, is remarkably spongy. If you told me it was a membrane board, I'd believe you, and the trackpad has this weird cheap semi-abrasive finish to it that gives me the ick a little bit (thanks Gen Z). But you know, no gamer worth their salt is going to be using that over one of the best gaming mice anyway.

Port selection is fairly minimal too, and there's no Thunderbolt either (given it's an AMD platform), although you do get HDMI 2.1, and Gigabit Ethernet to cover the essentials.

• Design score: 3.5 / 5

Alienware 15 (2026) review: Design

• RTX 5050 and 1200p screen are a radical pairing
• Single-channel RAM is frustrating
• Rapid sequential SSD performance, but it struggles on large transfers

Alienware 15 (2026) benchmarks

3DMark: Solar Bay: 39,795; Steel Nomad: 8,995
Cinebench R24: Single Core: 103; Multi Core: 826
Crossmark: Overall: 1,447; Productivity: 1,454; Creativity: 1,538; Responsiveness: 1,186
CrystalDiskMark: Sequential Read: 6,936.23 MB/s; Sequential Write: 5,899.46 MB/s; 4K Random Read: 57.73 MB/s; 4K Random Write: 119.74 MB/s
HandBrake 4K to 1080p: 125.6fps
Total War: Warhammer III: Mirrors of Madness (1080p, Medium): 134fps
Cyberpunk 2077: (1080p, Medium): 90.2 fp; (1080p, Medium, FSR Quality + FG): 156.6fps
Battery Life (PCMark 10): 4 hours and 9 minutes

Alienware's paired Nvidia's RTX 5050 laptop chip with that (I'm still calling it an) "IPS-like" 1920x1200 display capable of driving 165 Hz refresh rates, with AMD FreeSync to back it all up (at least in this configuration), and the good news is that performance absolutely slaps at that resolution.

Cyberpunk 2077 on the medium preset averaged 90fps at 1080p with the lows sliding in at just 72, and not a drop of upscaling insight. Switch to DLSS on quality with frame generation, and that figure skyrockets to 157 fps on average. Total War: Warhammer 3, also managed an impressive 134 fps as well, and Final Fantasy XIV's Dawntrail benchmark clocked an impressive 102 fps on the High (laptop) preset. Ultra at native resolution isn't off the cards here, and it shows.

As for the CPU, that's one of AMD's Zen 4 Hawk Point Ryzen 7 260s, complete with eight cores and 16 threads, and it cuts just as neatly a line in professional activities as its RTX 5050 counterpart does in game. Cinebench 2024 managed 826 points in the multi-core test, and it savaged 3D Mark's CPU Profile benchmark with a juicy 7,558.

(Image credit: Future)

There are a few caveats worth mentioning. Namely, the SSD is a bit... underwhelming. For one, it's just a 512GB model, and although its sequential performance is solid (it's a PCIe 4.0 unit provided by Samsung), the figures that count for game load times, random 4K read and writes, were well under par.

And then there's the memory. I've banged on enough about how frustrating it is dealing with the memory crisis, and manufacturers continually turning to single channel setups for their off the shelf PCs and laptops, and it's unfortunately true here. If you do want to expand and chuck another 16GB stick in later, yeah you can, but there really ought to have been a default option for that from the get go. It's like we're going backwards in performance, not forwards.

• Performance score: 4/5

Alienware 15 (2026) review: Battery life

• Rapid charging
• 70 Whr battery can't compete against hungry silicon

Let's not beat around the bush here; this is a gaming notebook. It's not a Snapdragon-based Acer model with ridiculously impressive multi day battery life, nor is it one of Intel's hyper-efficient Panther Lake units like we saw in Dell's latest XPS, no sir.

You can throw all the Nvidia Optimus screen switching tricks you can at this thing, but at the end of it all, it's still going to chew through battery life faster than I get through cable ties. And chew through it it did.

(Image credit: Future)

The Alienware 15 managed just 89 minutes in PC Mark's gaming battery benchmark, before tapping out at 2%. The video test faired much better however, scoring 4 hours and 9 minutes, although again a far cry from the 14 hours Asus's Vivobook S 15 Copilot managed.

Should I buy the Alienware 15 (2026)?

Attributes

Notes

Rating

Value

The performance per $ you're getting here is insane, particularly with that GPU and screen combo. However there's a catch, and if you're in the UK, you're going to be sorely disappointed.

3.5 / 5

Design

It's slimmer than its typical counterparts, and the port selection is solid, just don't expect modern 2026 connectivity standards.

3.5 / 5

Performance

Gaming performance? Tick. CPU performance? Also tick. But the SSD and RAM direly need an update.

4 / 5

Battery Life

89 minutes of gaming; four hours of content streaming; your ten year old Dell probably manages the same.

3 / 5

Final Score

If you're US based, and all you care about is gaming on the move, the Alienware 15 won't leave you disappointed. Just remember to keep it plugged in while you do it.

3.5 / 5

Buy it if…

You want a plug-in 1200p gaming notebook that actually puts that 165 fps panel to work
The RTX 5050 paired with the screen is genuinely smart, and delivers impressive performance at the price without any upscaling or frame-gen trickery.View Deal

You're on a tight budget, but you still want to game
This might be one of the best gaming laptops we've seen for the price. Yes, it's got a few rough edges, but if you smooth them out, it'll easily deliver.View Deal

Don't buy it if…

You care about color accuracy, or brightness
Officially, the panel's rated for just 62.5% sRGB coverage at 300 nits. Creative work, at least color-accurate creative work, is off the table entirely. This isn't a punchy OLED, that's for sure.View Deal

You're after a modern design
Bevelled edges everywhere really don't help sell the "premium" aesthetic that Alienware's after here. Maybe it's time to retire the curves in favor of something a little sharper.View Deal

Alienware 15 (2026) review: Also Consider

Lenovo LOQ 15

Lenovo's budget line is the one to beat. The current LOQ 15 pairs similar RTX 50-series graphics cards with street prices that regularly undercut the DA15265 by quite the margin. Dodge the Alienware tax, and benefit with a better piece of kit.

Read our full Lenovo LOQ 15 review

Acer Nitro 16

Acer's Nitro line follows in a very similar vein and its latest line-up including the RTX 50 series equally packs in some serious clout. You get the same GPUs, with better panels, consistently cheaper. That's a win through and through.

Read our full Acer Nitro 16 review

How I tested the Alienware 15 (2026)

• Tested at home, in the office and on the move
• Benchmarked and used across a wide variety of gaming and productivity tasks
• 11 years of expertise testing laptops, and three weeks with the Alienware 15

I put the Alienware 15 (2026) through its paces, testing it against my usual suite of gaming laptop benchmarks, covering everything from CPU performance, to gaming and everything else in between. I compared it against my database of similarly priced laptops, and used it as my daily driver for three weeks of thorough testing.

Every result was captured under identical, controlled conditions, on a clean Windows 11 install, with the latest updates and drivers. No programs or bloatware were removed, and no power profiles altered during testing, to better represent what an end-user might expect.

• First reviewed: August 2026

• Aliens: Fireteam Elite has been shut down on Nintendo Switch
• The game was offered as a cloud version on the platform, which meant it relied on being streamed from a server over the internet
• Those that spent money on the game do not appear to have been refunded

The Nintendo Switch version of Aliens: Fireteam Elite has been shut down, rendering it unplayable for those who bought it.

The game launched on Nintendo Switch on April 26, 2023, and unlike the versions available on other platforms, was a cloud version. That means it relied on being streamed from a server over an internet connection. A short demo version was available to try for free, but access to the full game cost $29.99.

There was even a $59.99 Ultimate Edition on offer, which threw in a raft of DLC, and means that some players would have paid 60 bucks for something that they can now no longer access at all.

Developer Cold Iron Studios quietly announced the shutdown back in March this year, sending a message to players thanking them for their support and confirming that the game "will be accessible until August 5, 2026" at which point buyers would "no longer be able to access the game."

It continued: "We apologize to our loyal customers for any inconvenience this may cause, and we appreciate your understanding. We hope you will continue to enjoy our other game titles."

Noticeably, there was no mention of any kind of refund for those who spent money on the game, and it doesn't appear that any affected players got one.

The news has picked up some steam on the r/gaming subreddit, with commenters rallying against cloud gaming and referencing fears surrounding the recent confirmation that Sony would be discontinuing the production of physical game discs in 2028 — pushing gamers towards digital formats.

"Everyone who bought this game should be eligible for a full refund," reads the top-rated comment. "This is why you don't buy a 'Cloud' version of a game," added another commenter. "It is a ticking clock."

One user wrote: "This is going to happen more and more as an all-digital future becomes standard... You don't own anything, you're just paying for the license to play something until it gets taken away."

A sequel, Aliens: Fireteam Elite 2, is expected to launch this year for PC, PlayStation 5, and Xbox Series X and Xbox Series S on August 25. It's also expected to come to Nintendo Switch 2 at a later date. Importantly, it won't be a cloud version, which will likely come as a relief to potential buyers.

• UK Prime Minister Andy Burnham has brought new subscription cancellation laws forward
• Originally scheduled for Spring 2027, they'll be in place by January 2027
• The government is also tackling 'phoney bargains' that promise bigger discounts than you're really getting

The UK’s Prime Minister Andy Burnham has announced consumer protection plans which aim to make it as easy to cancel a subscription as it is to sign up, and crack down on pretend deals, will be brought forward.

Originally set to land next spring, Burnham says they’ll be introduced by January 2027, “In time for when people often start new subscriptions, or cancel the ones they have, for the year ahead,” he explained in a Guardian article.

Once introduced the rules will require businesses to provide reminders before a free or discounted trial ends, and before a 12-month or longer contract automatically renews. Additionally UK subscribers will have a 14-day cooling off period once a free or discounted trial ends, or a 12-month or longer contract renews, to back out of the arrangement with a “full or proportionate refund.”

On top of this the government is mandating “straightforward cancellations,” such as requiring online exits for online sign ups.

(Image credit: Getty Images)

According to government statistics, there are 155m active subscriptions in the UK — and nearly 10 million are believed to be unwanted, costing members of the public an estimated £1.6 billion a year. Burnham adds, “The changes we are introducing will save an average of £14 a month for every unwanted subscription.”

Shadow chancellor Mel Stride described the announcement as “reheated,” as the new subscription rules were already announced under former Prime Minister Keir Starmer in April.

Fake bargains be gone

In addition to the fast-tracked subscription changes, the new rules will now also tackle “phoney bargains” as Burnham describes them — which can trick shoppers into believing they’ve snagged a better deal than they really have.

Essentially, if a deal is described as being half-off it has to actually be half-off. This would prevent a shop from drastically raising prices right before a sale to make discounts look stepper, or from pointing out how much a product is discounted based on a misleading recommended retail price (RRP) that the item hasn’t been sold at price for some time.

Similar rules were included in 2024’s Digital Markets, Competition and Consumer Act , however this change strengthens those protections and adds advertising false ‘was’ prices for on sale products to the Competition and Markets Authority list of banned practices.

This will make dishonest sales pricing illegal by default without the need to prove direct harm to consumers in each instance.

To hash out the exact rulings the government has said it will be launching a consultation this autumn.

Admittedly none of the changes are groundbreaking, nor will they entirely solve the cost of living squeeze we’ve been feeling, but I’m hoping they’ll make shopping online feel like less of a minefield — especially the new rules around sale prices.

I’ve covered half a dozen Black Fridays with TechRadar, rooting out the best tech deals I can find, and experienced first-hand how companies will try to obscure bad deals with bold discount promises — comparing sale prices to a long-forgotten RRP is one I’ve seen plenty of.

When it comes to subscriptions I think we can all conjure up memories of a free trial causing hurt when we forget to cancel, or setting up a recurring yearly subscription that gets lost to time, but continues to chip away at our finances.

Nothing will change right away, unfortunately. None of the new rules are set to land until January, though take this article as a reminder to look over your subscriptions today and maybe cancel the ones you don’t need any more.